Single Suction High Pressure Coarse And Fine Slag Pulp And Ore
Conveying Pump
Product overview for 300S-L model slurry pump
Pump body cover and flow parts: The series of pumps are horizontal
and vertical. The pump body and pump cover of the double pump
casing structure have replaceable metal lining. The lining is made
of high chromium wear-resistant alloy. Material, lining can be used
until wear-through, extending maintenance cycle, slurry pump
jacket, reducing operating costs. The pump outlet direction can be
rotated and installed at 8 angles.
Bearing assembly: The bearing assembly of the pump adopts a
cylindrical structure, which is convenient for adjusting the
clearance between the impeller and the front guard plate, and can
be completely removed during maintenance. The bearings are greased.
Shaft seal (sealing): The shaft seal type of the pump has packing
seal, impeller seal and mechanical seal. Transmission mode: V-type
V-belt drive, flexible coupling drive, gear reducer drive,
hydraulic coupling drive, variable frequency drive, thyristor speed
control, etc. Among them, V-type V-belt drive has CL, CV, CR, ZL,
ZV, ZR transmission.
Overall performance: The pump has a wide performance range, good
cavitation performance and high efficiency. Multi-stage series
technology can be used to meet long-distance transportation. The
flow-through components are available in a variety of metals and
add depth. With a variety of speeds and a variety of variants, long
service life, high operating efficiency, can meet a variety of
harsh transport conditions.
Type meaning of 300S-L model slurry pump
| Type meaning for 150E-L model slurry pump |
300S-L(R) |
| 300 | Discharge Diameter (mm) |
| S | Support Type |
| L | Light Model Low abrasion slurry pump |
| R | Natural Rubber Liner |
Quality control for 300S-L model slurry pump
| Inspection Equipment |
| 1. Inspection and Detection |
| With various inspection and detection instruments ,like
three-coordinate measuring instrument ,metallographic microscope,
direct reading spectrometer ,Brinell hardness meter ,Vickers
hardness meter, carbon and sulfur analyzer and other detection
equipment,we can carry on the chemical composition analysis
,physical properties test ,coordinate measurement for various
steel&steel materials |
| Complete pump set inspection |
| We have performance testing platform for each batch pump inspection
before delivery |
| Quality control system for each set slurry pump |
Purchasing raw material ra | 1. Strict rules and procedures to choose the raw material supplier |
| 2. Each batch raw material will be tested by quality control
department |
C casting of parts
| 1 .Melting:Chemical element analysis for raw material before and
after stove . |
| 2.Moulding :Strict sand moulding qualified before iron liquid
pouring for casting |
| 3. Cleaning semi-finished parts sand :Strict inspection on the
appearance and size qualified before storage. |
Machining of
slurry pump
| 1. Self -inspection and inspection between different steps. |
| 2. First part inspection |
| 3. Procedures inspection |
| 4..Inspection before storage the mining slurry pumps |
A Assembling of sl slurry pump | 1. Inspector tracks the whole process of assembly of slurry pumps |
| 2. Slurry Pump pressure inspection and fillout the testing table |
| 3. Painting inspection |
| 4. Performance testing and fillout the testing table |
| 5. Packing inspection of slurry pump |
| 6. Issue quality certificate |
Performance Chart
| type | Max. | ClearWaterPerformance | Impeller | Application |
|
| Capacity | Head/m | Speed/rpm | Efficiency | NPSH | Nos | Diameter |
|
|
| 20 A-L | 7.5 | 2.34-10.8 | 6-37 | 1400-3000 | 30 | 3.5-8 | 4 | 152.4 | -Ball mill discharge |
| 50 B-L | 15 | 16.2-76 | 9-44 | 1400-2800 | 55 | 3.5-8 | 5 | 190 | -Coarse tailings |
| 75 C-L | 30 | 18-151 | 4-45 | 900-2400 | 57 | | 4 | 229 | -Rod mill discharge |
| 100 D-L | 60 | 50-252 | 7-46 | 800-1800 | 60 | | 4 | 305 | -Coal washing |
| 150 E-L | 120 | 115-486 | 12-51.5 | 800-1500 | 65 | | 4 | 381 | -Wet crushers |
| 200 E-L | 120 | 234-910 | 9.5-40 | 600-1100 | 64 | | 4 | 457 | -Phosphate matrix |
| 250 F-L | 120 | 396-1425 | | 500-800 | 77 | | 5 | 550 | -Minerals concentrate |
| 300 S-L | 560 | 468-2538 | 8-60 | 400-950 | 79 | | 5 | 653 | -Lime grinding |
| 350 S-L | 560 | 650-2800 | 10-59 | 400-840 | 81 | | 5 | 736 | -FGD waste water |
| 400 ST-L | 560 | 720-3312 | 7-51 | 300-700 | 80 | | 5 | 825 | -Flotation |
| 450 ST-L | 560 | 1008-4356 | 9-48 | 300-600 | 80 | | 5 | 933 | -Process chemical |
| 550 TU-L | 1200 | 1980-7900 | 10-50 | 250-475 | 86 | | 5 | 1213 | -Pulp and paper |
Selection & Performance Chart
