Metal Liner High Chrome Slurry Pump For Heavy Duty With Discharge Suction 6 Inch

Main introduction of slurry pump

1. The primary applications for the 6/4D- metal slurry pumps are mill discharge, crusher slurry, sand

and aggregate or any coarse solids or other severe, abrasive slurries especially in the copper, gold,

iron ore, lead-zinc, coal or phosphate plants.

2. The most dramatic savings will be in these applications, though savings will also be realized on find

solids, like fine sand recovery or kaolin. The key advantage of the SH metal slurry pumps is the 10%

to 30% lower power, long even wear life and less pump downtime, which results in lowe cost-per-ton

pumped, along with better cyclone separation.

Model meaning

6/4D-

6-------Suction diameter

4-------Discharge diameter

D-------Frame type

------ Slurry pump type

Typical Applications:

Ash Handling

Cyclone Feeds

Pulp and Paper

Abrasive Slurries

Coal Preparation

Mineral Processing

Aggregate Processing

slurry pump 6/4D- flow control:

During the operation of the slurry pump, attention should be paid to the temperature and leakage of the

packing gland. Normal packing leakage should not exceed 10-20 drops per minute.
In the pump operation, if the slurry pump can take in air and it can be solid, it will make an abnormal

sound and vibrate accordingly.
In the pump operation, if the backup valve of the backup machine leaks and the switching valve is always

open, it should be noted that the backup machine is reversed due to the reverse flow.
When the pump regulates the flow during normal operation, it is not possible to reduce the flow rate by

reducing the opening of the pump suction line valve. Otherwise, the pump inlet flow will be insufficient and

the pump will cavitation.
In the pump operation, for the bearings that need cooling water, pay attention to the temperature and

quantity of water, and try to keep the bearing temperature within the specified range.

Performance table

Construction Design

Shijiazhuang ShizaPump Industry Co.,Ltd. founded in 2008, is a professional industrial pump manufacturer engaged in researching slurry pump, wear and corrosion resistant materials and OEM processing.

Shizapump group covers more than 40000 square meters, the registered capital is 18 million yuan. Over the years with strong strength and people-oriented concept, we absorb a large number of high-quality management and technical talents. Existing staff is more than 220 people, of whom 30% are technicians.

Our production area covers an area of 24000 square meters, the total production capacity of an annual output is 10000 units (sets), and the annual output of all kinds of high chromium alloy castings is 2000 tons.The production area is divided into five districts one area and two centers, namely mould casting, heat treatment, fine machining, forge welding and assembly coating of five production areas; finished spare parts; quality analysis and water experiment. The main material of products: A05, A49, A33, A51 and other high chromium white cast iron.

Shijiazhuang ShizaPump Industry Co.,Ltd. fully implements the ISO9001 management system and observes the process of inspection. Quality inspection records are available in all production processes. Professional instruments include spectrometer, metallographic analyzer, flaw detector, mechanical test machine (strain, impact, hardness), magnetic flowmeter, pressure gauge, ammeter, vibration meter, noise meter, hydraulic experimental curve of professional software. Perfect detection guarantees the quality of equipment to ensure that each pumps and parts are fully in line with the requirements.

Shijiazhuang ShizaPump Industry Co.,Ltd. has spread all domestic market in China over 30 provinces and municipality. Also has been successfully used in 20 countries in global .First line staff have professional experience to provide service for customers.