500WN Pump With Diesel Engine Motor Has No Leakage And Low Power
Consumption
Product structure and characteristics:
1. Advanced water conservancy model, CAD 3D design, high
efficiency, significant energy saving effect;
2. Deep digging, high dredging concentration; good cavitation
performance, strong suction capacity;
3. Strong overcurrent capability, continuous pumping of gravel ,
high-plastic clay block, etc.;
4. Strong matching, can be equipped with diesel engine, can also be
directly equipped with motor;
5. Wide applicability, can be applied to all kinds of soil; mud
pump is usually equipped with five blades and three blades The
impeller can also provide various impeller diameters according to
the specific requirements of the construction. The 500WN dredging
pump model and various blade types are suitable for impellers of
various specific working conditions.
6. The water loss is small, the efficiency is high, and the fuel
consumption is low.
Use:
Dykes are built, rivers are dredged, and Blowing sand and
reclamation and so on.
Precautions:
1. Check the vibration, noise and outlet pressure of the unit;
2, check the sealing of the pump and the inlet and outlet pipes, no
leakage;
3. Check the sealing pressure and flow rate of the mechanical seal
shaft;
4. Check all fasteners such as bolts and nuts for signs of
looseness. If so, tighten them in time.
Specifications quick check
| Pump Model | 500WN |
| Capacity | 4500 - 5500 m³ / h |
| Head | 30 - 72m |
| Speed | 350 - 450 r / min |
| Eff | 78-80% |
| NPSH | ＜4.8m |
| Inlet Dia | 650mm |
| Outlet Dia | 500mm |
| Max. Dia. Of Flowd Particle | 250mm |
Performance table
| Type | Capacity (m3/h) | Head | Speed | Efficiency | NPSHr | Outlet Diameter | Max.Diameter of Flowd Parti |
| (m) | (r/min) | (%) | (m) | (mm) | (mm) |
| 200WND | 600~800 | 20~40 | 700~900 | 60~65 | <4.5 | 250 | 178 |
| 200WN | 750~1000 | 40~65 | 700~850 | 70~72 | <4 | 250 | 180 |
| 250WND | 950~1100 | 20~40 | 500~700 | 65~70 | <4 | 300 | 220 |
| 250WN | 1100~1300 | 40~65 | 500~650 | 70~74 | <4 | 350 | 144 |
| 300WND | 1500~1800 | 20~40 | 400~600 | 65~68 | <4 | 350 | 241 |
| 300WN | 1800~2200 | 40~65 | 400~550 | 74~78 | <4 | 450 | 241 |
| 350WN | 2600~3000 | 40~65 | 400~550 | 74~78 | <4.5 | 450 | 245 |
| 400WN | 2800~3200 | 20~40 | 400~550 | 74~78 | <4.5 | 450 | 250 |
| 450WN | 3200~3850 | 40~67 | 350~500 | 76~80 | <4.5 | 600 | 354 |
| 500WND | 3600~4200 | 20~40 | 220~320 | 72~75 | <4.8 | 600 | 330 |
| 500WN | 4500~5500 | 40~65 | 350~450 | 78~80 | <4.8 | 650 | 250 |
| 600WN | 5000~9000 | 55~80 | 280~420 | 81~85 | <6 | 660 | 220 |
| 700WN | 8000~12000 | 60~85 | 280~380 | 83~85 | <6 | 760 | 280 |
| 900WN | 12000~19000 | 50~75 | 280~330 | 85~87 | <6 | 960 | 320 |
| 1000WN | 16000~25000 | 23~76 | 181~290 | 85~87 | <6 | 1200 | 350 |
Pump Packages
Deliverying by sea, so we package our pump and parts with plastic
cloth inside and waterproof outside. The wooden cases are export
standard, its thickness is 10mm at least. Also we have professional
workers to do this cases.We are very near to Tianjin seaport, so it
is comfortable to deliver anytime, also the short delivery save the
cost.
Selection Chart
